Project Description

How to use WIZnet Chip set such as W5100, W5200, W5300, and W5500 with Basic source code

by MCS electronics

---

---

Overview

This post introduces how to use WIZnet chip solution such like as W3100A, W5100, W5200, W5300, and W5500 with BASIC source code on BASCOM-AVR & BASCOM-8051.
BASCOM-AVR & BASCOM-8051 are BASIC complier & IDE development tools. These can implement with BASIC source code on WIZnet chip solutions.

CONFIG TCPIP

• Syntax W3100A
  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, TWI=address] [, Clock = speed] [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W3100A]

  1 2	CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, TWI=address] [, Clock = speed] [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W3100A]

• Syntax W5100
  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, TX= tx, RX= rx , NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=5100] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp]

• Syntax W5200
  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5200] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx]

  1 2	CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5200] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx]

• Syntax W5300
  CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W5300] [,INT=imsg] [,NOUDP=noudp] [align=align] [TXn= tx] [, RXn= rx] [SOCKMEM=sockmem]

  1 2	CONFIG TCPIP = int , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [, baseaddress = address] [,TimeOut=tmOut] [,CHIP=W5300] [,INT=imsg] [,NOUDP=noudp] [align=align] [TXn= tx] [, RXn= rx] [SOCKMEM=sockmem]

• Syntax W5500
  CONFIG TCPIP = NOINT , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5500] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx]

  1 2	CONFIG TCPIP = NOINT , MAC = mac , IP = ip, SUBMASK = mask, GATEWAY = gateway, LOCALPORT= port, NOINIT= 0|1 [,TimeOut=tmOut] [,CHIP=W5500] [,SPI=spi] [,INT=imsg] [,CS=cs] [,NOUDP=noudp] [TXn= tx] [, RXn= rx]

Learn More

Goto Original

Related Projects

• 

  In this posting, GLCD is controlled with iPod touch/Safari through WebSocket.

  Controlling GLCD with Arduino and iPod touch

  December 21st, 2017

  2 62 0
• 

  It describes how to display the text typed on web browser on the LCD with Arduino Ethernet shield.

  Web interactive LCD controlled by Arduino

  December 21st, 2017

  0 31 0
• 

  Let's port the MySensors open communication platform to the Edison and broaden our platform options!

  Port MySensors to Edison platform

  December 21st, 2017

  0 27 0
• 

  The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet).

  connect arduino with ethernet

  December 21st, 2017

  0 63 2
• 

  Create the perfect mood in your room, wake-up easily, light up your room as you enter or be alerted when someone enters your private space.

  Multifunctional RGB LED light

  December 21st, 2017

  0 29 2